Installation - You need to copy three files (Here is a Zip version). This includes: The system disk image, The tools disk  and  rawrite.exe   a program that copies disk images to floppies. To use rawrite you place a formatted floppy disk in your drive, type rawrite and follow the prompts

The initial configuration:  The initial system configuration is done on the firewall-router directly (One day I'll figure out how to build the configuration over the web)

   step 1 - create the two floppies
           Download the 3 files (I've zipped them together)
           If your using a windows machine
                   use rawrite to copy files to floppies
           If your using a unix machine to download, use dd to write the two images to floppies
           After the disks are written, you should write protect the tools floppy.
The floppies are normal msdos 1440 images which can be duplicated on a pc.

   step 2. Initial Boot (Checks that your disks were written correctly)

      Place the system floppy in the firewall- router machine and boot
      after a while you should get a login prompt
      You want to login, your user name is root
      You should not need a password
      when you get a prompt %
      type setup
      the firewall - router will ask you to insert the tools disk

  step 3. Select your cable modem vender

   The firewall - router will ask you if you are using MediaOne. answer y
   If you answer n - the firewall - router will ask you if you have a static or dynamic ip address
   based on your answer it will then ask you to supply data from your cable service.

  step 4. Configure the ethernet cards and optional services